Hallöchen,
ich hab da seit vorhin ein kleines Problem. Habe erst seit ein paar Monaten meinen ersten Mac und kenne mich deshalb noch nicht sonderlich gut aus.
Jedenfalls hab ich ihn heute morgen mal nach ner Woche Urlaub wieder gestartet und es wurd direkt nach Systemupdates gefragt. Dacht ich, mach ich mal, kann ja nicht schaden…
Naja, nach dem Update kam ne Fehlermeldung, dass es nicht abgeschlossen werden konnte (unbekannter Fehler :-X ) und seitdem kann ich das Mail-Programm nicht mehr öffnen. (Heut morgen vor dem Update ging es noch) Es hüpft zwar noch unten Fröhlich 3 mal im Dock rum, aber weiter geschieht nichts!
Was kann ich jetzt machen?? Wäre echt gut, wenn mir jemand helfen könnte, da ich so gut wie wirklich keine Ahnung hab
hallo sasi und herzlich willkommen im Forum von macprime.ch!
reparier zuerst mal die Zugriffsrechte, das machst du folgendermassen: öffne das Programm Festplatten-Dienstprogramm im Ordner Programme:Dienstprogramme, hier kannst du links die Festplatte auswählen, auf der das System installiert ist, nun kannst du auf den Button «Volume-Zugriffsrechte reparieren» klicken … ggf. ist das Problem dann behoben, ansonsten kannst du’s mal mit dem löschen der Preferences (Einstellungen) probieren … die findest du unter Benutzer:DEINBENUTZERNAME:Library:Preferences … hier das File com.apple.mail.plist löschen …
sollte es noch immer zu problemen kommen, einfach nochmals melden
ps: kannst du das Update ggf. nochmals installieren oder werden sie garnicht mehr gelistet? Weisst du noch welches Update es war?
Danke für die schnelle antwort und vor allem die verstehbare anleitung..
habe alles so gemacht, zugriffsrechte repariert und die preferences gelöscht, hat aber leider nichts gebracht.
hab schon 2 mal versucht, das update nochmal zu installieren, war dieses allgemeine Mac OS X Update 10.4.7. bei jedem versuch hat er am ende diese fehlermeldung angezeigt.
was mir auch noch aufgefallen ist, ist dass icq zb keine geräusche mehr macht, obwohl es eingeschaltet ist und der ton an, aber da hab ich shcon abhilfe geschaffen.
was mach ich wenn das mit mail nicht mehr hinhaut? neu installieren?
hey, ja hab ich grad runtergeladen, aber fürs installieren brauch ich wohl erst das “aktualisierer-update”, was ich nirgendwo finde, falls es nciht eh das ist, was bi mir irgendnen fehler zeigt…
och menno
Das Combo-Update kannst du unabhängig von der verwendeten Version installieren. Es enthält sämtliche Updates, die Apple bis jetzt veröffentlicht hat.
Unbedingt das Combo Update installieren. Achtung keine updates automatisch laden - umstellen auf manuell.
Keine Zuggriffsrechte mehr reparieren. Seit 10.3 ist dies nicht mehr notwendig. Alle professionellen UNIX Spezialisten raten davon ab.
Betreffend Mail: Installiere Thunderbird oder Eudora zusätzlich und importiere dort alle mails die du hast - es gibt dann mit absoluter Sicherheit keinen Datenverlust.
Beide Programe haben das gleiche Mail format wie Mail nähmlich .mbox
Sobald das OK ist.
mail preferences löschen
Nachher mail starten aber nicht vom Dock sondern direkt aus dem Programmordner.
Keine Zuggriffsrechte mehr reparieren. Seit 10.3 ist dies nicht mehr notwendig. Alle professionellen UNIX Spezialisten raten davon ab.
Die Erfahrung zeigt aber, dass sich viele Probleme mit dem Reparieren der Zugriffsberechtigungen beheben lassen, auch unter Tiger!
Das ist absoluter Vodoo Glaube. Der nachfolgende englische Artikel von John Gruber gibt das klar wieder. Auch klar ist, dass Apple in keinem Update ab 10.4 sowieso davon spricht Zugriffsberechtigungen reparieren zu lassen.
By John Gruber
‘Repair Permissions’ Is Not a Recommended Step When Applying System Updates
Monday, 3 April 2006
Like most of the content in MacInTouch’s daily reports, there’s no permalink, alas, but today, in a tidbit related to the release of Mac OS X 10.4.6, there’s this dubious nugget:
Rich Cruse notes an extra surprise in Mac OS X 10.4.6:
As you know, with any update we are told to repair permissions before and after installing new system software or updates. With the 10.4.6 update, there is a new twist to the installation process and a welcome surprise after. After you install the update and are prompted to restart, the machine does its usual thing. It stays on the Grey Apple screen for a longer than usual time, but now instead of stalling, it restarts itself and boots normally. The welcome surprise is that after the machine boots up, a quick “Repair Permissions” says that everything is A-Okay. There were no repairs needed! That is a first! Perhaps they added a script to do exactly that, since most people haven’t a clue on how to or where to find the Disk Utility and Repair Permissions. All is fine so far with the update.
We are told to repair permissions before and after each update by whom? Certainly not by Apple. Perhaps Cruse means “them”, the same “them” who, in the classic Mac OS era, recommended zapping your PRAM every time you need to reboot your Mac after the system was wedged by a crashed app.
To be clear, perfectly clear: Apple does not recommend that you do this. All you need to do before applying a system update is follow the steps in the accompanying release notes, and nowhere therein has it ever been mentioned that you should run Disk Utility’s Repair Permissions feature before or after installing the update, let alone doing so before and after.
[Update: And to be even more clear, the 10.4.6 updater does not repair permissions as part of its installation process. The second reboot for PowerPC-based Macs has nothing to do with permissions; it’s because some of the components updated in 10.4.6 run very early in the boot process and are installed after the first reboot. The second reboot is so the machine can start up with those new components in place. What’s still a mystery to me is why this double reboot only applies to PowerPC machines; perhaps Intel-based Macs already have up-to-date versions of these components?]
I wrote about the simple steps I follow when applying system updates a little over a year ago, and my advice still stands. The only part of it that I truly consider essential is step 2: to perform a full backup before applying the update. I use SuperDuper to keep a mirror of my entire startup drive on a pair of external FireWire disks which I rotate every few weeks.
Important note if you, like me, back up to external hard drives: It’s a good idea to unmount and disconnect your external drives — but especially your backup drive — before running a system update. A buggy installer could damage or inadvertently delete files from any mounted drive on your system. Remember the iTunes 2 installer? If your backup drive isn’t even connected, nothing the installer does can possibly affect it.
Repairing permissions is a troubleshooting tool, not a regular maintenance step. I have never run repair permissions on any of the four Macs in active duty here at Daring Fireball HQ, and none of them have had a single problem attributable to system and security updates.1
It’s this simple: if it were good for your Mac, Apple would recommend it. I guarantee you that the engineers on Apple’s installer team know more than “they” do.
I’ll also add that “they” recommend running the full Combo updaters with each update. Me? I just run Software Update. “They” make a lot more work out of system updates than they need to. ?
Zugriffsrechte reparieren ist tatsächlich weder vor noch nach einem Update in irgendeiner Weise hilfreich. Aber es kann dann hilfreich sein, wenn tatsächlich ein Problem vorhanden ist, beispielsweise dass ein Programm nicht starten will. (das ist ja auch die Aussage des von sierra zitierten Artikels).
Betreffend Mail: Installiere Thunderbird oder Eudora zusätzlich und importiere dort alle mails die du hast - es gibt dann mit absoluter Sicherheit keinen Datenverlust.
Beide Programe haben das gleiche Mail format wie Mail nähmlich .mbox
Sobald das OK ist.
mail preferences löschen
Nachher mail starten aber nicht vom Dock sondern direkt aus dem Programmordner.
Mail speichert die E-Mails nicht im .mbox-Format ab, zumindest seit Tiger nicht mehr.
Aber unabhängig davon glaube ich, dass diese Methode nicht zum Erfolg führt. Offenbar startet Mail trotz gelöschter Preferences und reparierter Rechte nicht. Man kann zwar die Mails sicher in ein anderes Mail-Programm kopieren und dort arbeiten, aber am Problem, dass Mail.app nicht startet, wird dies nichts ändern.
Die einfachste Methode, Mail zum Laufen zu bringen, dürfte folgende sein: Entweder du kopierst Mail von einem anderen Mac mit aktueller Systemversion auf deinen Mac oder du installierst Mail einzeln nochmals von der System-DVD. Das sollte mit der Freeware Pacifist (findet man auf www.versiontracker.com) möglich sein.
Zugriffsrechte reparieren ist tatsächlich weder vor noch nach einem Update in irgendeiner Weise hilfreich. Aber es kann dann hilfreich sein, wenn tatsächlich ein Problem vorhanden ist, beispielsweise dass ein Programm nicht starten will. (das ist ja auch die Aussage des von sierra zitierten Artikels).
Betreffend Mail: Installiere Thunderbird oder Eudora zusätzlich und importiere dort alle mails die du hast - es gibt dann mit absoluter Sicherheit keinen Datenverlust.
Beide Programe haben das gleiche Mail format wie Mail nähmlich .mbox
Sobald das OK ist.
mail preferences löschen
Nachher mail starten aber nicht vom Dock sondern direkt aus dem Programmordner.
Mail speichert die E-Mails nicht im .mbox-Format ab, zumindest seit Tiger nicht mehr.
Aber unabhängig davon glaube ich, dass diese Methode nicht zum Erfolg führt. Offenbar startet Mail trotz gelöschter Preferences und reparierter Rechte nicht. Man kann zwar die Mails sicher in ein anderes Mail-Programm kopieren und dort arbeiten, aber am Problem, dass Mail.app nicht startet, wird dies nichts ändern.
Es geht im ersten Schritt darum primär Datenverlust zu verhindern und nicht darum mit welchem Programm gearbeitet wird.
Es ist richtig, dass Apple relativ diskret und schlecht dokumentiert das Mail format geändert hat aus Indexierungsgründen von Spotlight.
Glücklicherweise bleiben die .mbox Files nach der Konvertierung in elmx aber erhalten was für ein zusätzliches Backup oder den kurzfristigen import in ein anderes Mailtool eine wesentliche Hilfe darstellt. (2ter englischer Text)
Es gibt aber einen Konverter um auf absolut sicher zu gehen
http://www.cosmicsoft.net/emlxconvert.html
Mail for Mac OS X 10.4 stores messages in individual elmx files instead of a single mbox file. This allows Spotlight to index individual messages, but makes it harder to move your mail to other mail clients like Thunderbird.
Two existing hints (A script to export Mail’s mboxes for Thunderbird and 10.4: Export Mail messages to Thunderbird, revisited) seem to imply that you need a script or application to easily create an mbox file. However Mail (I’m using Version 2.1 on 10.4.7) does know how to create mbox files – it just doesn’t use the term Export.
Select the messages you want in the mbox file. (Press Command-A to export the whole folder.)
Go to the File menu and select Save As…
Enter a filename for your mbox file. The default filename is the Subject of the first message, but this doesn’t mean you’ll be saving each message individually.
Select where you want the file saved.
Select Format: Raw Message Source
Save.
The result is a file in mbox format, complete with MIME attachments, that you can import into other mail clients.
The only drawback is that Mail stores message status (Read, Unread) separate from the elmx files, and it won’t create X-Status headers when exporting to mbox. This means that all messages appeared to be unread when I import them into Thunderbird.
Mail Cleanup
When you upgrade from Panther to Tiger, Mail converts the old format mbox files & indexes to .elmx files and spotlight indexing. To be safe, it doesn’t delete the old files in case you want to roll back. It also doesn’t update them though, so they’re kind of worthless spacewasters.
Here’s a list of commands to clear out the Panther grime. Make sure you have a backup of ~/Library/Mail, of course. Each line starting with find should be a separate command in a Terminal window.
If you don’t make a backup before running this and this nukes your email, it’s your fault.
(Bearbeitet am 02. September 2006 um 18:20 Uhr von )
Anmelden um neue Antworten zu verfassen
Allegra Leser! Nur angemeldete Nutzer können bei diesem Beitrag Antworten hinterlassen. Jetzt kostenlos registrieren oder mit bestehendem Benutzerprofil anmelden.
Ab CHF 5.– im Monat
👉🏼 Wir benötigen deine Unterstützung! Unterstütze macprime mit einem freiwilligen Gönner-Abo und mache die Zukunft unseres unabhängigen Apple-Mediums aus der Schweiz mit möglich.
macprime unterstützen
macprime Forumseit update vieles komisch…
VonAntwort von sasi
Unsere Sponsoren
Dich als Sponsor präsentieren und macprime mit möglich machen.
Stefan Rechsteiner
sasi
dae
sasi
Thomas Zaugg
sierra
Thomas Zaugg
sierra
(Bearbeitet am 02. September 2006 um 13:37 Uhr von )
dae
sierra
(Bearbeitet am 02. September 2006 um 18:20 Uhr von )
Anmelden um neue Antworten zu verfassen
Allegra Leser! Nur angemeldete Nutzer können bei diesem Beitrag Antworten hinterlassen. Jetzt kostenlos registrieren oder mit bestehendem Benutzerprofil anmelden.